Black Friday: Pro Kit and Classic MK2 Kit reduced, drive lug cheaper with a Pro Kit – until 29 Nov only. See the offers →

What matters is the flywheel puller thread: it must be an M27x1 left-hand (LH) thread. Apart from a few special configurations, the Drillstarter fits all common pit bike and MiniGP engines. Confirmed engines: Daytona Anima 150/160/190/212 | YinXiang YX 140/160 | Zongshen/GPX ZS 155/190/212 and Tokawa 160. The Zongshen ZS190 works with the “Drillstarter Classic MK2” using the original ignition cover, or alternatively with the “Drillstarter Pro” together with a prepared ignition cover from our shop. Not compatible: Zongshen ZS190 with electric-start flywheel.

The three prerequisites

  1. Flywheel thread M27x1 left-hand (LH): the thread the flywheel puller screws into.
  2. Hole in the ignition cover: about 30 mm diameter, centred (step drill) – or a prepared cover from the shop.
  3. No e-start flywheel (e.g. Zongshen 190 with e-start).

Confirmed compatible engines

All models and engines offered by Ohvale fit – in addition to the engines already confirmed, e.g. Daytona 190.

Engine Classic MK2 Kit Pro Kit Note
Daytona Anima 190 yes yes
Ohvale (all models and engines offered by Ohvale) yes yes All models and engines offered by Ohvale fit – in addition to details already confirmed, e.g. Daytona 190
YX160 yes yes
Zongshen ZS155 yes yes
Tokawa 160 yes yes
Zongshen 190 (no e-start) yes only with the alternative cover Pro: "ZS190" cover from the shop
Zongshen 190 with e-start / e-start flywheel no no

Other engines (Daytona Anima 150/160, YX 150/180/190/200, Zongshen 212): the shop covers are listed for them; kit compatibility is not explicitly confirmed in the sources.

Prepared ignition covers in the shop

All covers have ventilation holes to cool the ignition on hot days.

Cover Fits (per shop product text)
YX cover without sprocket cover Daytona Anima 150/160/190; Yinxiang YX 150/160/180/190/200; Zongshen ZS155, ZS190; Tokawa 160
ZS cover with sprocket cover Daytona Anima 150/160/190; YX 150/160/180/190/200; Zongshen ZS155; Tokawa 160
Daytona Anima cover all Daytona engines without electric start
ZS190 cover Zongshen 190/212, with shortened inner ring

Harder decompression spring

A harder decompression spring (190/212 cc) for Daytona Anima 190/212 and Zongshen ZS190/212 (70 % harder than the original spring: 10 instead of 9 coils) makes turning the engine over easier, especially in the first revolutions, and protects the drill and engine parts.

Compatibility FAQ

Does the Drillstarter fit my engine? If the flywheel thread is M27x1 left-hand and no e-start flywheel is fitted, usually yes. If in doubt, contact us with the engine type and a photo.

Do I have to drill the ignition cover? Yes, a centred hole of about 30 mm is needed. Prepared covers are available in the shop.

Does the Drillstarter work on the Zongshen 190 with e-start? No.

→ Classic MK2 Kit · Pro Kit · All FAQ

Loading...
Back to top