Black Friday: Pro Kit and Classic MK2 Kit reduced, drive lug cheaper with a Pro Kit – until 29 Nov only. See the offers →

Drillstarter Pro Kit

Regular price: €159.00 (Save €30.00)
Price: €129.00

The Pro Kit starts pit bike and MiniGP engines with a cordless drill: integrated safety freewheel, integrated damper and a ball-head hex that allows angled use up to ±20°. Compatible with Daytona Anima 190, YX160, ZS155 and Tokawa 160, among others; Zongshen 190 only with the alternative ignition cover.

Share

The Pro Kit at a glance

On the Pro Kit the safety freewheel sits in the drive unit instead of on the flywheel. Only a slim drive lug with a ball-head socket stays on the flywheel. The Pro Kit is positioned as "perfect for MiniGP". The ball-head hex allows angled use up to ±20°.

Video

The Pro drive with ball-end hex drive in action.

Scope of delivery

  • 1 × drive unit: chuck element, damper element, drive element with ball head, freewheel coupling
  • 1 × drive lug (ball-head socket)
  • 1 × spare chuck lock screw (M6 × 27 mm, left-hand thread)

Prerequisite: flywheel thread M27x1 LH. → Compatibility

Frequently asked questions about the Pro Kit

Who is the Pro Kit for? For pit bike and MiniGP riders who want a slim adapter on the flywheel and the safety freewheel in the drive.

Can I hold the drill at an angle? The ball-head hex allows angled use up to ±20°.

Does the Pro Kit fit the Zongshen 190? Yes, but only with the alternative ignition cover from the shop.

How do I start a second bike? With a second Pro drive lug on the second engine.

→ Classic vs Pro · Installation and start · Manual (PDF) · More FAQ

  • Reference
    10301
  • In stock

User manual Drillstarter Pro (EN)

Download (1.11MB)
  • Vibration-dampedVibration damper protects drill, crankshaft and bearings.
  • ModularComponents available as spare parts in the shop.
  • CompactFits in the drill case.

Specifications

FeaturePro Kit
Freewheelsafety freewheel (freewheel coupling) integrated in the drive unit
Dampingintegrated vibration damper (damper element)
Connectiondrive element with ball-head hex, angled use up to ±20°
Drill sidechuck element (heavy-duty chuck attachment)
Flywheel sideslim drive lug with ball-head socket, M27x1 left-hand (LH) thread
Materialsteel
Usepit bike and MiniGP

Compatibility

EngineStatusNote
Daytona Anima 190compatible30 mm hole in the ignition cover; prepared cover in the shop
Ohvale (all models and engines offered by Ohvale)compatibleAll models and engines offered by Ohvale fit – in addition to details already confirmed, e.g. Daytona 190
YX160compatibleprepared cover in the shop
Zongshen ZS155compatibleprepared cover in the shop
Tokawa 160compatible
Zongshen 190 (no e-start)only with the alternative ignition covercover available in the shop
Zongshen 190 with e-start / e-start flywheelnot compatible

What else you need

  • Cordless drill (or 220 V drill) with at least 2 gears; 2nd gear at least 1500 rpm; at least 18 V; quick-stop; more than 70 Nm recommended. No impact driver, never hammer-drill mode.
  • Step drill for the approx. 30 mm hole in the ignition cover.

Important notes

  • Never start in 1st gear of the cordless drill (risk of injury).
  • Flywheel and central nut must be tight.
  • The Pro drive lug only fits the Pro Kit, not the Classic MK2.

Frequently asked questions about the Pro Kit

Who is the Pro Kit for?

For pit bike and MiniGP riders who want a slim adapter on the flywheel and the safety freewheel in the drive.

Does the Pro Kit fit the Zongshen 190?

Yes, but only with the alternative ignition cover from the shop.

How do I start a second bike?

With a second Pro drive lug on the second engine.

Comments (0)

No customer reviews for the moment.

1 other product in the same category

  • -€30.00
Drillstarter Classic MK2 Kit
€119.00
€149.00
Rated out of 5 stars based on review(s)

Viewed products

  • New
Damper element Pro
€14.90
Rated out of 5 stars based on review(s)
Flywheel holder
€12.90
Rated out of 5 stars based on review(s)
Loading...
Back to top