Drillstarter Classic MK2 Kit
The Classic MK2 Kit starts pit bike engines with a cordless drill: safety freewheel on the flywheel side, vibration damper and modular design. Compatible with Daytona Anima 190, Zongshen 190 (no e-start), YX160, ZS155 and Tokawa 160, among others.
The Classic MK2 Kit at a glance
The kit consists of a drive unit for the drill chuck and a freewheel unit that screws into the flywheel. The safety freewheel prevents foreign objects from catching and stops the drill from spinning along after the start. The vibration damper (damper element) sits in the drive unit: it eliminates vibrations, dampens impact forces and protects the cordless drill, crankshaft and bearings.
Scope of delivery
- 1 × drive unit: chuck element, damper element, socket element
- 1 × freewheel unit: pin with round shaft, freewheel with pressed-in bearing, locking screw with countersunk washer, hex for removal, stop edge with groove
- 1 × spare chuck lock screw (M6 × 27 mm, left-hand thread, fits most drills)
Prerequisite: flywheel thread M27x1 LH. Details: Compatibility.
Frequently asked questions about the Classic MK2 Kit
Does the Classic MK2 Kit fit my engine? If the flywheel thread is M27x1 left-hand and no e-start flywheel is fitted, usually yes. Confirmed: Daytona Anima 190, Zongshen 190 (no e-start), YX160, ZS155 and Tokawa 160.
How does it differ from the Pro Kit? On the Classic MK2 the freewheel sits in the freewheel unit on the flywheel; the Pro Kit has the freewheel in the drive unit and a ball-head connection. → Classic vs Pro
Can I start two bikes? Yes: with a second freewheel unit (spare part) the drive unit stays in the drill, and the freewheel unit stays in the second engine.
Does the Pro drive lug work on the Classic MK2? No, the Pro drive lug only fits the Pro Kit.
-
Reference10245
-
In stock
- Vibration-dampedVibration damper protects drill, crankshaft and bearings.
- ModularComponents available as spare parts in the shop.
- CompactFits in the drill case.
Specifications
| Feature | Classic MK2 |
|---|---|
| Freewheel | safety freewheel in the freewheel unit (flywheel side), pressed-in bearing |
| Damping | damper element as vibration damper in the drive unit |
| Drill side | chuck element (heavy-duty chuck attachment) |
| Removal | integrated hex SW 16 on the freewheel unit; stop edge with groove |
| Flywheel connection | M27x1 left-hand (LH) thread, supplied with copper paste on the thread |
| Material | steel, hardened |
| Design | modular, every single element available as a spare part |
| Transport | fits in the drill case |
Compatibility
| Engine | Status | Note |
|---|---|---|
| Daytona Anima 190 | compatible | 30 mm hole in the ignition cover; prepared cover in the shop |
| Ohvale (all models and engines offered by Ohvale) | compatible | All models and engines offered by Ohvale fit – in addition to details already confirmed, e.g. Daytona 190 |
| YX160 | compatible | prepared cover in the shop |
| Zongshen ZS155 | compatible | prepared cover in the shop |
| Tokawa 160 | compatible | |
| Zongshen 190 (no e-start) | compatible | |
| Zongshen 190 with e-start / e-start flywheel | not compatible |
What else you need
- Cordless drill (or 220 V drill) with at least 2 gears; 2nd gear at least 1500 rpm; at least 18 V; quick-stop; more than 70 Nm of torque recommended. No impact driver, never use hammer-drill mode.
- Step drill for the approx. 30 mm hole in the ignition cover.
Important notes
- Never start the engine in 1st gear of the cordless drill (risk of injury from compression forces).
- Flywheel and central nut must be tight – a loose flywheel damages the crankshaft even without the Drillstarter.
- Correct handling is important to avoid damage to the engine and drill. Follow the manual and the FAQ.
Frequently asked questions about the Classic MK2 Kit
Does the Classic MK2 Kit fit my engine?
If the flywheel thread is M27x1 left-hand and no e-start flywheel is fitted, usually yes. Confirmed: Daytona Anima 190, Zongshen 190 (no e-start), YX160, ZS155 and Tokawa 160.
How does it differ from the Pro Kit?
On the Classic MK2 the freewheel sits in the freewheel unit on the flywheel; the Pro Kit has the freewheel in the drive unit and a ball-head connection. → Classic vs Pro
Can I start two bikes?
Yes: with a second freewheel unit (spare part) the drive unit stays in the drill, and the freewheel unit stays in the second engine.
Does the Pro drive lug work on the Classic MK2?
No, the Pro drive lug only fits the Pro Kit.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent